...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
| Table of Contents | ||
|---|---|---|
|
Introduction
Custom Screens are used to design customised data entry windows that can be attached to various parts of the
...
EXACT program.
Custom screens are usually attached to service items, although they can also be used to record medical history and create extra tabs in the Patient File window to record specialised information. When applied to treatment services, custom screens remain editable after the treatment is charged, up until midnight on the day of charging - see Editing and Viewing Custom Screens and Clinical Notes
Any information that is entered
...
into a custom screen
...
Some custom screens will have been set up for you when EXACT was installed, or as part of an upgrade process. If you wish to add a new custom screen, but are unsure of what to do even after reading the following instructions, please contact SOE Support.
See also these online Portal resources:
EXACT Custom Screen Archive - UK & EIRE
The blog post includes a download link to these custom screen examples:
...
- Amalgam Filling
- BPE
- Case Synopsis
- Child Exam
- Child Protection
- Defective Restorations
- Dental Health Check
- Dentures
- Exam Notes
- Filling Material
- Hygienist
...
- Implant Assessment Form
- Implant Treatment Plan
- LA Used
- New Exam
- NICE Guidelines
- Occlusal Exam
- Oral Cancer Screening
- Oral Hygiene
- Pain Notes
- Periodontal Prescription
...
can be reported on. Custom screens can help to reduce time in the surgery when entering clinical notes; for example a custom screen designed for root canal therapy can immensely reduce the amount of typing required.
Some custom screens will have been set up for you when EXACT was installed, or as part of an upgrade process. If you wish to add a new custom screen, but are unsure of what to do even after reading the following instructions, please contact SOE Support.
| Widget Connector | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Create a Custom Screen
Create custom screens and link them to services so that they pop up as required during charting.
On request from |
EXACT users a software update in version 12.5 changed the behaviour of Quick Plans that have custom screens attached. However, this change proved problematic for many other users, so to satisfy the needs of all users, the following applies from v12.6: From v12.6 |
EXACT by default reverts to the earlier behaviour (pre v12.5). A configurable setting (off by default) has been added to retain the new behaviour. Summary: When popup mode is planned or completed, quick plans with custom screens attached continue to use the current custom screen version and default values. With popup mode disabled, quick plans with custom screens attached use the custom screen version and the custom screen values from the original charting used to create the quick plan. To change the default behaviour, go to Configure > Settings and edit this setting: patient.chart.quick plan.custom screen.default to "1". Default:  Optional:  |
TIPS:
Build custom screens on the practice computer that has the lowest screen resolution. The reason for this is that if you build it on a wide screen PC and then try and use it on a smaller screen part of the custom screen may be cut off.
When building a combo box add a combo entry with a blank title, so that you can set the default as blank rather than already having an entry.
To create a Custom Screen
Select Configure > Custom Screens… to open the List Custom Screens window, which lists all custom screens that are currently in your database:
Click the +1 button on the tool bar at the bottom of the screen to add a new Custom Screen.
Create the custom screen from this window:
Code
Click in the Code field and enter a brief name for the custom screen (no more than 10 characters, and it must be unique, as it will be used to identify this screen).
Title
Click in the Title field and enter a brief title for the custom screen that indicates the purpose of the screen, such as "Instructions to Hygienist", "Medical History Update", "Prescription background details". etc.
(This can be up to 99 characters).
Edit, Add, Delete.
The screen creation process is a matter of adding and positioning controls and fields on a blank screen, and editing or deleting them where necessary.Use the+1 (Add) button to add entry fields to the custom screen
Configure custom screens to pop up as required during charting:
Three mutually exclusive choices are available in the service record.
Go to Configure > Services > double-click a service to display the Edit Service Item window.
The choices are displayed alongside the selected Custom Screen field:
Popup disabled (don't pop-up). Use this option to create a new screen that you don't want to use just yet. When you are ready to use it, select either of the next two options.
Popup when planned (when charting). This will display the custom screen when the charting details are entered.
Popup when completed (when the patient chart is saved).
Add Extra Tabs to the Patient File for Custom Information
Create a Custom Screen with the information you require to be recorded.
Go to the 'Patient File' option on the Configure menu, and use the "Extra tab list " and "Extra tab list 2" fields and select the screen(s) you want to add to the tab(s).
Click OK to save the Patient File configuration.
The next time you access the Patient File, the extra tabs you have added will be available to record patient details.
Add a Custom Screen Entry Field
When you create a custom screen, you need to add the entry fields to it, as defined below.
The Medical Alert Trigger is only intended for use with Medical History, and does not trigger in other system areas such as Charting.
In the "Add Custom Screen" window, click the
button to display the Add Form Field window:
Complete the fields in this window as follows (note that any attributes that are inapplicable for a particular type, or that are set by the system, or that cannot be set at this point, will be greyed out)
Type | Click the drop-down and select a field type for the custom screen: Label - Use to add a label to the custom screen (e.g., a section heading, data entry instructions, etc). Date - Enables a date to be recorded Number - Records a number Number 1 dec - |
Records a number with one decimal place. Text Box - |
This field enables any text to be entered in a box. Check Box - |
Inserts a check box which enables the field to be set to either On or Off (ticked or not ticked). Money - |
Records the information as currency. Example: $xx.xx Option Group - |
Create a group of 'radio buttons', where each field in the group is only one mutually exclusive option of several possibilities. |
Create an option group before specifying option buttons. Option Button - Use Option buttons to specify the different options (fields) within an option group. Only one option per group may be selected. Combo Box - Creates a combo box (drop-down menu). |
Create this before adding any combo entries into the combo box. Combo Entry - Specify the entries available within a combo box. Note Field - Write longer notes about a treatment item, or another entry on the custom screen. Tab - Use this field to specify on which of the available tabs the element is to appear. When present, tabs will be drawn at the top of the custom screen, with the name given to them in the Title field. The tabs required can be selected by name. Only tabs that have previously been entered for the custom screen may be selected from. | |
Tab | Use the drop-down arrow to select the Tab on which this field is to appear (this field will be greyed out if no tabs have been defined). |
Title | Click in the ‘Title’ field and enter a title for the form. |
Number of letters | If the type of field selected is for data entry, use this field to select the maximum number of characters that may be entered in the text box field. |
Group | Use the Group field in conjunction with the Option Group and Combo Box options to determine into which group the selections will be entered. If you add Combo Entry fields immediately after creating the Combo Box field they belong to, the Group field number is automatically assigned. |
Line | Use the ‘Line’ field to determine which line the field will be displayed on. The Line number will change automatically when a new selection is added. This may need to be changed if more than one selection is to be placed on the same line, or if the line assigned is not where you want the field to be. If you have two or more fields on the same line, be sure to use the next two 'Offset' fields to position them so they don't overlap. To check the positioning of the fields, click the Set Default entries button to view how the finished screen will appear. |
Label left offset | Use the Label left offset field to set the left margin of the first character of the field Title. |
Field left offset | Use the Field left offset field to set the left margin of the field in the custom screen. |
Width | Use the Width field to set the width of the field displayed. This is generally automatically calculated, based on the other field parameters, so that it is sufficient to accommodate the number of characters in a string. If you need to set this manually, set it to be equal to the maximum number of characters multiplied by 7, plus 15. |
Height | Use the Height field to set the height of the entry/display box for a ‘Note’ field (for other field types, this will be ‘greyed out’). If this is only one line, set it to 19, or add 10 for each extra line of height you want to display. This field does not control how many lines of notes can be entered, only how many are displayed. For example, if you specify a height of 29 (two lines) and more than two lines of text are entered, then the field will display up/down arrows at the side, so the user can scroll up/down to view the extra lines. |
Bold | If required, check the Bold checkbox to display the Title of the field in bold type. |
Italic | If required, check the Italic checkbox to display the Title of the field in italic type. |
Show zero as blank | Checking this box will show a blank field for any number fields that are 0. If unchecked, an entry of 0 (zero) will be displayed as 0, indicating that it was deliberately entered, rather than being left blank by mistake. |
Don't display title | Checking this box will suppress the title of the field in the Custom screen. This is generally used only where a field is display only and doesn't need a prompt to tell the user what the field is for or what to enter. |
Triggers Medical Alert | A custom screen can trigger a medical alert if it's used as a custom Medical History screen. The Medical Alert Trigger is only intended for use with Medical History, and does not trigger in other system areas such as Charting. |
3. As you enter each field, click the OK button to save it.
Example 1 - Simple Custom Screens
The following example creates a simple custom screen for ‘Monitoring Lab Work’. This custom screen will have:
A drop-down selection for the laboratory used, with two lab names created.
Another drop-down for the shade of crown, with several values for this.
A date field for the date an order was sent.
Another date field for when the completed order was received.
A drop-down for the checked status of the delivered order ('satisfactory', 'unsatisfactory')
A text field for the person who received the order to enter their initials.
From the Configure menu, select Custom Screens….
Click the
button at the top of the window to add a new Custom Screen.Enter LABS as the unique code.
Enter Monitoring Laboratory Work as the title.
NOTE: The Set Default Entries button is inactive at this point in the process. As fields are added to the Custom Screen, you will use this button to view the way the screen will look.
Click the
button to add a field to the Custom Screen.Select Combo Box as the field type from the drop down list (this is the field type for drop-down menus).
Enter Lab Used as the Title. The remaining fields should be completed as in the example window below:
Click OK to save the field entry information. This will return you to the Add Custom Screen window and display the entry as shown below:
NOTES:
The Set Default Entries button will display the custom screen being created, provided that at least one field has been added.
To view and/or modify the settings for a field, click on it to highlight it, then click the Edit button.
Highlight a field and click on the Delete button (bin) to delete it.Repeat the above steps, selecting the appropriate Type and other variables, to add the following fields according to the examples shown below:
a) Add a laboratory name:
b) Add a second laboratory name:
c) Add the 'Shade' drop-down field:
d) Add a value for 'Shade':
e) Add a second value for 'Shade'
f) Add a third value for 'Shade'
g) Add 'Date Sent' field
h) Add 'Date Received' field
i) Add a 'Checked' status drop-down
j) Add a 'Checked' status code
k) Add a second 'Checked' status code
l) Add a Text field for a user's initials
The ‘Add Custom Screen’ window will now look similar to the following:
Click the Set Default Entries button to view the completed custom screen and set any default entries.
Setting default entries means that the selected options will be displayed each time the custom screen is used, minimising the amount of data entry for instances where a particular value is more commonly used than the other options. For instance, in this worked example, the checked status 'Satisfactory' is much more likely to be used than 'Unsatisfactory', so you would set that as the default.
To set a default, click a drop-down, or enter a value in a field, as appropriate.
If any of the fields are incorrect - for instance, there is a spelling mistake, two fields have been assigned to the same line and overlap, or a field is too short to allow the necessary data to be entered, click the Cancel button, and return to the 'Edit Custom Screen' window.
Click on the field that needs editing, and click the Edit button to open the 'Edit Form Field' window for that field.
Use the Set Default Entries button again to check the results.After setting the defaults, click ‘OK’ to save the selected defaults and close the window, then click the Save button save the custom screen and make it available for use throughout
...
EXACT.
Example 2 - Complex Custom Screens
The following example is a more complex Custom Screen, which incorporates more than one field on the same line, and a mixture of check boxes, option buttons, and drop-down (combo box) fields, as shown in the example below:
...
From the ‘Configure’ menu, select ‘Custom Screens’ (if this window is not already displayed).
Click on the
button to add a new Custom Screen.Enter ‘HYGDET’ as the unique Code.
Enter ‘Hygiene Details’ as the Title.
Click on the
button to add the required fields. The first one will look similar to this example:
Note that it is a 'Label' type field, and that the 'Bold' checkbox is ticked, as we want it to stand out from the other labels on the screen.Click the 'OK' button to save the field.
Following the same steps as outlined in Example One (steps 5-8) add the following fields to create the ‘Hygiene’ Custom Screen.
Note that for each checkbox, we need to add an offset from the previous one on the same line.
To keep them nicely lined up, we'll make this an even increment of 75.
To work out the 'Field left offset' for even spacing with no overlap, take the number of characters plus spaces for the longest field (apart from the right-most one), multiply this by 7, and add 15. So for our example, this is 'Dark Red', with 8 characters (including the space). This comes to (8 x 7) +15 = 71. To make the increment easier to calculate, this could be rounded off to 75 or even 80 (if we wanted a bit more space between fields).
So, the label has an offset of 5 (to space it out from the edge of the window, and subsequent fields have offsets of 75, 150, 225, and so on.
a) Add a check box for 'Firm' | b) Add a second check box for 'Boggy' |
The first two fields will look like this: | |
 |  |
Rather than show each window, below is a summary of the settings for each field for the first three lines of the table. (Note that inapplicable fields have been omitted from the table).
Type | Title | Line | Field left offset | Other |
|---|---|---|---|---|
Type | Title | Line | Field left offset | Other |
Label | Gingiva | 0 | 5 | Tick 'Bold' |
Check box | Firm | 0 | 75 | |
Check box | Boggy | 0 | 150 | |
Check box | Fibrotic | 0 | 225 | |
Check box | Hyperplastic | 0 | 300 | |
Label | Colour | 1 | 5 | Tick 'Bold' |
Check box | Pink | 1 | 75 | |
Check box | Red | 1 | 150 | |
Check box | Dark Red | 1 | 225 | |
Check box | Blue/Red | 1 | 300 | |
Label | Papilla | 2 | 5 | Tick 'Bold' |
Check box | Pink | 2 | 75 | |
Check box | Red | 2 | 150 | |
Check box | Dark Red | 2 | 225 | |
Check box | Blue/Red | 2 | 300 |
The next group of fields are slightly different, in that they are Option Groups and Option Buttons.
They are also arranged in two columns, on five lines each. They are set up as summarised in the following table:
Type | Title | Group | Line | Field left offset | Other |
|---|---|---|---|---|---|
Type | Title | Group | Line | Field left offset | Other |
Option Group | Margins | 1 | 3 | 5 | 'Label left offset' 5 |
Option Button | Normal | 1 | 3 | 70 | |
Option Button | Recession | 1 | 4 | 70 | |
Option Button | Irregular | 1 | 5 | 70 | |
Option Button | Rolled | 1 | 6 | 70 | |
Option Button | Bulbous | 1 | 7 | 70 | |
Option Group | Oral Hygiene | 2 | 3 | 175 | 'Label left offset' 210 |
Option Button | Very Good | 2 | 3 | 300 | |
Option Button | Good | 2 | 4 | 300 | |
Option Button | Fair | 2 | 5 | 300 | |
Option Button | Poor | 2 | 6 | 300 | |
Option Button | Very Poor | 2 | 7 | 300 |
The last group of fields insert the last line which contains a label and two combo boxes regarding Bleeding.
Type | Title | Group | Line | Field left offset | Other |
|---|---|---|---|---|---|
Type | Title | Group | Line | Field left offset | Other |
Label | Bleeding | 0 | 8 | 5 | Tick 'Bold' |
Combo Box | On Probing | 3 | 8 | 125 | Label left offset 65 |
Combo Entry | Low | 3 | 8 | 125 | Width 60 |
Combo Entry | Medium | 3 | 8 | 125 | Width 60 |
Combo Entry | High | 3 | 8 | 125 | Width 60 |
Combo Box | With Scaling | 4 | 8 | 290 | Label left offset 225 |
Combo Entry | Low | 4 | 8 | 290 | Width 60 |
Combo Entry | Medium | 4 | 8 | 290 | Width 60 |
Combo Entry | High | 4 | 8 | 290 | Width 60 |
Click on the 
button to view your completed custom screen and select the required default entries.
Tips and Tricks With Custom Screen Layout
Our finished screen in the example above has lots of fields, and looks a little 'busy' as a result. If we add some blank lines between blocks of fields, by skipping line numbers 4 and 10 (and adding one to the line number of the fields that were on lines 4 to 8, and make what was line 8 line 11 instead), it gives us a screen that is still compact, but easier on the eye.
Another problem is that the drop-down items (Combo Boxes) for 'Bleeding' drop down to obscure the 'OK' and 'Cancel' buttons. One way to get around this, is to add another field on line 12 which adds an extra line between the other fields and the buttons. (We could also add it on line 13 to add two extra lines, if required). If we add a 'Label' field on line 12, and save it with a blank 'Title', space is allocated in the window for it, moving the 'OK' and 'Cancel' buttons down, but it is effectively invisible, with a width of 0. The resultant screen looks like this:
...
Field Order and Default Values
Another trick for usability is considering the order of fields, and what default values (if any) you assign. With our example above, you will note that for each data entry field, the most commonly chosen (or 'most healthy') options are positioned next to the prompt or label for the field, and the 'least healthy' are furthest away. This consistency makes it more logical for the user. If for example, the order of the 'Oral Hygiene' options were reversed, it would be not unlikely that the user would select the wrong option first, then correct it.
Whether you set default entries for each field, and what defaults you choose, is up to you. On the one hand, if you set the defaults to the most common options, it minimises data entry. On the other hand, leaving fields blank forces the user to enter a value, which tends to make them check the defaulted values are correct. However, unlike other screens in
...
EXACT, custom screens do not force mandatory data entry for fields. If there is a label on the window instructing users that particular fields should not be left blank, it will help minimise missing data.
Attaching Custom Screens to Services
Custom Screens are generally used to assist with recording commonly required information for particular services. Examples of commonly used custom screens include:
Lab Work Monitoring
Hygiene Information
Endodontic Measurements
Medical Information
Cosmetic Work
There are two ways that custom screens can be attached to services:
Attaching a single Custom Screen to a Service
The Custom Screen Services Window
Attaching a Single Custom Screen to a Service
Configure > Services...
Locate and double-click the service in the Services list.
The Edit Service Item screen displays.
In this example the objective is to attach the a custom screen called LABS - Monitoring Laboratory Work to service C - Crown Related Services ('Monitoring Lab Work' was created in an earlier example)
In the Custom Screen field, use the list selector button
(or the F4 key) to open the View Custom Screens window, from where you can select the required Custom Screen:
Back in the Edit Service Item window, select the appropriate popup behaviour for the custom screen:
The norm is Popup when planned or Popup when completed, unless the popup has been disabled until a particular date when you want to start using it.
Click OK to save the changes and your screen should look similar to the following:
The outcome is that this custom screen will popup when you plan service C.
Charting with Custom Screens
When a service with a custom screen attached is charted in the patient's chart, the custom screen is automatically included as part of the service item, as shown in the example below:
...
Depending on the behaviour code chosen for the custom screen, the custom screen will either pop up when you chart the service it is attached to, or when you mark the course of treatment as completed. In this example, the custom screen was displayed when the item was charted.
You can double-click on the ‘Custom Screen’ text to open the window so that details can be viewed, and altered if necessary:
...
When this service is charged or otherwise moved to the Treatment History window, the custom screen is also displayed with the service item permanently recording the details entered.
...
SEE ALSO THESE ONLINE RESOURCES:
Portal blog and video: Custom Screens - Design your own
...
Portal blog and video: How to start using Custom Screens 
The blog post includes a download link to these custom screen examples:
|
|
|
Using the Custom Screen Configuration Window
This option enables you to:
Easily set-up custom screens used on services,
See which services a custom screen is being used on,
Quickly add the custom screen to (or remove it from) a list of services.
This is accomplished via a button on the List Custom Screens window, as follows:
To set up a Custom Screen to use on Services
Select Configure > Custom Screens:
Select the service item for which you wish to set up a custom screen and click the Set Services button at the bottom of the screen:
The Custom Screen Services window displays for that service:
The new window’s title will be appended with the name of the custom screen. In the example above, the custom screen is RAD.
The list of available services displays in the left pane.
The custom screen(s) used by the services are shown in the Custom Screen column.
The right hand panel shows a list of services that use the custom screen currently being edited (in this example, only RADS).
Use the >> << controls to move highlighted services either right (add them to list of services using the custom screen) or left (remove them from the list).
Use CTRL-click to highlight more than one item for moving.
The D, P, C boxes indicate whether the custom screen has popup Disabled, popup on Planning, or popup on Completion.
The default setting for new services brought across to the right hand list is Disabled (this enables you to set up services and custom screens without them being inadvertently being used while you are setting them up.)
The popup settings are mutually exclusive - a service can have only one setting at a time.
Change Statuses by clicking in another checkbox.
When the window initially loads these boxes take their setting from the service.
Once you've configured the custom screen services, select OK to save or Cancel to discard.
Custom Screen Field Placement Guides
To become proficient at creating custom screens, a good eye for field placement and sizing is useful.
Maximum positioning co-ordinates will depend on the screen size of the monitor and the resolution it is running. If computers with different display settings are in use, custom screens should be designed to be viewable from any computer.
The following tables can also be used as a guide.
Field Position
These are fields with a width of 50 spaced every 50 units. Each field below displays within it the field starting position.
...
Field Width
In general, a guide for calculating field size is to multiply the number of characters by 7, then add 15.
So a field that has a list of parameters where the longest parameter title is 10 characters will need to be 85 units wide.
This shows Field widths ranging from 10 units to 400. Numbers have been entered into the fields to give you an idea of the amount of text different size fields can contain. The letters ‘M’ and ‘W’ are wider than most characters, and therefore have more of an effect on the overall amount of text a field can display.
...
Tips when Creating Custom Screens
Design
Always create a design on paper first. Decide on the information to record, what Field Type would best achieve this and where this will be positioned on your Custom Screen.
Consider future requirements, e.g. Labs; while only two may be used now there may have more in the future. Therefore it would be wise to use a Combo Box (not an Option Group) as this can easily accommodate additional entries without the need to redesign the Custom Screen field placement.
Tab Order
Add fields in the order they should be tabbed through, since the tab order is set to the order the fields were created and cannot be altered. If additional fields will be added in future, add Label fields while building the screen but do not enter any label text. These will be blank fields not displayed when the Custom Screen is used. These can be changed into the appropriate field type in the future to accommodate changes. These blank fields can also be used to enter blank lines into a custom screen to space the fields and avoid it looking crowded. Another trick for doing this is to skip line numbers; for example, if you had a block of fields in lines 0 to 6, and wanted a gap to separate the next block of fields, start the numbering again at line 8.
Treatment Planning
It can be difficult to manipulate treatment plans when large custom screens are attached to services. Consider creating a set of services specifically to hold the custom screens. These can be added to the Course of Treatment when it is time to complete the custom screen and not before. To easily locate and recognise a custom screen service, create a separate Service Category ‘-Custom Screens’ to list these.
...
Bulky Custom Screens
There is a limit to the number of fields allowed on a custom screen. Split large custom screen designs into two or more parts and attach these to separate Services.
Tabbed Custom Screens
As of EXACT vxx.xx you can also use Tabs for Custom Screens:
...
...
For a list of downloadable Custom Screens See EXACT Custom Screen Archive - UK & EIRE