| Note |
|---|
Dit is Deze optie alleen beschikbaar in Examine Pro versie 8. |
...
Open de behandelkaart van een patiënt.
Open Examine Pro vanaf het afbeeldingen tabblad.
In Examine Pro ga naar Opties - Setup.
HOW TO CHANGE THE INFORMATION DISPLAYED
Go to Options and select ‘Setup’
In the Setup screen, scroll to the bottom and select ‘Optimize’
Use the arrow buttons to navigate through to the ‘Patient info’ tab
Scroll aan de linkerkant naar beneden en klik op ‘Optimize’.
Gebruik de pijltjesknoppen om door de lijst met opties te gaan en klik op ‘Patient info’.
Dubbelklik op de geselecteerde tekst en klik op ‘Verwijderen’.
asda
asd
Double click on the highlighted text
Then click ‘Delete’
Then clear the text box of the information and click the three dots next to the box
Double click on the information required and once populated on the right hand side click the Tick on the bottom right.
Click on the ‘transfer’ button to move this into the ‘actions to perform’ section.
Click Save Changes and OK the pop-up.
...
TO ADD INFORMATION TO ALL IMAGES:
This will add information to all images taken AFTER the preset has been activated
In the same set up screen, click on the Appearance tab
Select the device you are using from the list
Vistascan may display as ScanX
Carestream may display as Kodak/Trophy RVG
PSPIX may display as Acteon/Sopro
Using the drop down, select ‘Patient info’ for every option in the device section
Select Save Changes and click OK on the prompt.
...