Page Comparison

TO ADD INFORMATION TO INDIVIDUAL IMAGES:

1. Double click the image you want the information on so that it opens into a viewport.

2. Right click on the ‘Tick’ button in Examine Pro.

3. Select ‘Patient Info’ from the list. This will apply to the image currently in the viewport.

   Image Removed

4. Press the save button. This will save this information on the image.

   Image Removed

5. This will result in the Patient Number, Name and DOB on the bottom of the images.

HOW TO CHANGE THE INFORMATION DISPLAYED

1. Go to Options and select ‘Setup’

   Image Removed

    

2. In the Setup screen, scroll to the bottom and select ‘Optimize’

   Image Removed

    

3. Use the arrow buttons to navigate through to the ‘Patient info’ tab

   Image Removed

    

4. Double click on the highlighted text

   Then click ‘Delete’

   Then clear the text box of the information and click the three dots next to the box

   Image Removed

    

5. Double click on the information required and once populated on the right hand side click the Tick on the bottom right.

   Image Removed

    

6. Click on the ‘transfer’ button to move this into the ‘actions to perform’ section.

   Image Removed

    

7. Click Save Changes and OK the pop-up.

This preset can now be used following the previous instructions to add the patient information to individual images.

TO ADD INFORMATION TO ALL IMAGES:
This will add information to all images taken AFTER the preset has been activated

1.  In the same set up screen, click on the Appearance tab

   Image Removed

    

2. Select the device you are using from the list

   • Vistascan may display as ScanX

   • Carestream may display as Kodak/Trophy RVG

   • PSPIX may display as Acteon/Sopro

     Image Removed

      

3. Using the drop down, select ‘Patient info’ for every option in the device section

   Image Removed

    

4. Select Save Changes and click OK on the prompt.

...