Dit is alleen beschikbaar in Examine Pro versie 8.
TO ADD INFORMATION TO INDIVIDUAL IMAGES:
Double click the image you want the information on so that it opens into a viewport.
Right click on the ‘Tick’ button in Examine Pro.
Select ‘Patient Info’ from the list. This will apply to the image currently in the viewport.
Press the save button. This will save this information on the image.
This will result in the Patient Number, Name and DOB on the bottom of the images.
HOW TO CHANGE THE INFORMATION DISPLAYED
Go to Options and select ‘Setup’
In the Setup screen, scroll to the bottom and select ‘Optimize’
Use the arrow buttons to navigate through to the ‘Patient info’ tab
Double click on the highlighted text
Then click ‘Delete’
Then clear the text box of the information and click the three dots next to the box
Double click on the information required and once populated on the right hand side click the Tick on the bottom right.
Click on the ‘transfer’ button to move this into the ‘actions to perform’ section.
Click Save Changes and OK the pop-up.
This preset can now be used following the previous instructions to add the patient information to individual images.
TO ADD INFORMATION TO ALL IMAGES:
This will add information to all images taken AFTER the preset has been activated
In the same set up screen, click on the Appearance tab
Select the device you are using from the list
Vistascan may display as ScanX
Carestream may display as Kodak/Trophy RVG
PSPIX may display as Acteon/Sopro
Using the drop down, select ‘Patient info’ for every option in the device section
Select Save Changes and click OK on the prompt.
This will ensure that all of the images acquired from the PC with this preset enabled will have the information selected automatically applied to them.