Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Version published after converting to the new editor

Search these help files

...

Table of Contents
maxLevel2

Configuration within EXACT

With the EXACT Online Booking Website Builder all configuration is within EXACT; there is no need to go online for configuration.

...

  1. Create an initial list of Providers who can take online bookings, with booking rules that integrate with the appointment book.

    From the Online Booking Configuration window - Providers who can take bookings from these types of patients: New Patient, Recall Patient, Planned Treatment, Existing Patient .

    (The initial settings are not critical, as these can be changed as you add the providers to their respective reasons)

  2. Set up the booking reasons.

    From the Online Booking Configuration window - Setup your booking website from within the EXACT software.

  3. Map the Providers to the booking reasons.

...

WebSetupButton Web Setup button: Setup your booking website from within the EXACT software.


Enabling the Online Appointments tab in the Appointment Book

...

  1. Open the Appointment Book for the current user.
  2. Click the Configure button at bottom right spannericon.
  3. In the Appointment Book Setup Wizard, tick Select tabs for your activity bar, and then click Next:

    AppointmentBookSetupWizard1

    You will see a statement:

    AppointmentBookSetupWizard-userStatement

  4. Click Next to continue.
  5. In the Select Tabs window, select Online Appointments and click the arrow button to move it to the right pane:

    AppointmentBookSetupWizard-SelectTabs

    Select Online Appointments in the right pane and use the Up / Down arrows to position the Online Appointments tab (the order of tabs in the right pane will be the ordering of the tabs in the Appointment Book Activity Bar):

    AppointmentBookSetupWizard-UpDown

    For example, the current ordering in the image above will order the Activity Bar tabs as follows:

    AppointmentBookSetupWizard-Tabs

  6. Click the Finish button and check that the Online Appointments tab appears in the Appointment Book activity bar.
  7. Important: Repeat this procedure for every user who will manage Online Appointments.

...

  1. Select Configuration > Online Booking to open the Online Booking Configuration screen.
  2. Select the New Patient tab:

    OLB-NewPatientTab

    The task now is to set up each Provider with their own default settings that apply when New Patients book with that Provider.

    Overview: You need to click the +1 button to open a configuration screen, edit the fields on the screen and save, then repeat by means of the +1 button for all Providers who will be available for online bookings.

  3. Select the [+1] button to open a window in which to configure a Provider for the New Patient online booking:

    OLBConfigurationScreen-NewPatientTab-Provider setup

    Provider: Select a Provider or type a Provider code.

    Note that you can optionally populate these fields by selecting the Copy settings from Provider button and then selecting the other Provider from the popup window:

    Provider-CopyTheSettingsOf

  4. Configure the Appointment time per patient type:

    Either set a default appointment duration in minutes or type in the New patient service code (each service is configured with a service duration that EXACT will note as the appointment duration)

  5. Configure the Free time available for new online patients.

    Specific clinic:

    Check (tick) this checkbox if you are limiting online bookings to one specific clinic.

    Select the clinic:

    ViewApptCategories

    Specify the days into the future.

    All unbooked non-clinic time: Check (tick) this checkbox if you are limiting online bookings to all time available outside of clinics. Set the days into the future.

    All unbooked time: Check (tick) this checkbox if you are limiting online bookings to all free time, whether in or out of clinics. Set the days into the future.

  6. Setup Welcome\Confirmation Templates (where the new patient is welcomed and receives confirmation of the booking) in SMS and Email. Either use the same templates as for other booking types or create templates especially for new patient online booking.
  7. Select OK to save.

    You may see a NOTE:

    OLB-GenWarningReDefaultProviderDetails

    This clarifies that the custom settings in the Web Setup > Reasons will not be overridden by the default setup.

  8. Repeat this procedure for all appropriate Providers.

...

  1. Select Configuration > Online Booking to open the Online Booking Configuration screen.
  2. Select the Existing Patient tab.

    ExistingPatientsTab

  3. Select the +1 button Plus1 at bottom right to open the configuration window:

    OLBConfigurationScreen-ExistingTab-Provider setup


    Provider:

    Select a Provider for whom you will set up the availability for bookings.

    Note that you can optionally populate these fields by selecting the Copy settings from Provider button and then selecting the other Provider from the popup window:

    Provider-CopyTheSettingsOf

    Appointment Time per patient type

    Either set a default appointment duration in minutes or type in the default patient service code (each service is configured with a service duration that EXACT will note as the appointment duration).

    Existing patient service: The default service for an existing patient

    Free time available for new online patients

    Specific clinic: Check (tick) this checkbox if you are limiting online bookings to one specific clinic.

    All unbooked non-clinic time: Check (tick) this checkbox if you are limiting online bookings to all time available outside of clinics.

    All unbooked time: Check (tick) this checkbox if you are limiting online bookings to all free time, whether in or out of clinics.

    Confirmation Templates

    Setup (where the new patient is welcomed and receives confirmation of the booking) in SMS and Email. For example:

    Templates

    Either use the same templates as for other booking types or create templates especially for existing patient online booking.


  4. Select OK.

    EXACT will start to upload available times for the existing patients to book into.

    You may see a NOTE:

    OLB-GenWarningReDefaultProviderDetails

    This clarifies that the custom settings in the Web Setup > Reasons will not be overridden by the default setup.

  5. Repeat the above procedure for all Providers who will treat Existing patients booking online.


...

  1. Select Configuration > Online Appointments to open the Online Booking Configuration screen.
  2. Open the Recalls tab:

    OLB-RecallsTab

    Order of Appointments: In the case of a combined recall, this sets the order of appointments.

    Maximum Minutes between appointments: Determines the gap between multiple appointments, should they be booked.

  3. Select the +1 button Plus1 to open a window in which to configure a Provider for the Recalls online booking:

    OLBConfigurationScreen-RecallsTab-Provider setup

    Provider: Select a Provider for whom you will set up the availability for bookings.

    Note that you can optionally populate these fields by selecting the Copy settings from Provider button and then selecting the other Provider from the popup window:

    Provider-CopyTheSettingsOf

  4. Configure the Free time available for Recall online patients.

    Specific clinic: Check (tick) this checkbox if you are limiting online bookings to one specific clinic.

    All unbooked non-clinic time: Check (tick) this checkbox if you are limiting online bookings to all time available outside of clinics.

    All unbooked time: Check (tick) this checkbox if you are limiting online bookings to all free time, whether in or out of clinics.

  5. Setup Confirmation Templates (where the patient receives confirmation of the booking) in SMS and Email. Either use the same templates as for other booking types or create templates especially for Recalls online booking. Important: Ensure that you include the [recall.url] merge field, as this is required for the patient to make an online booking. You can either type this in, or select it from the All or Recall merge field lists

...

Online Recalls / Bookings needs to be configured correctly, but is also dependent on multiple EXACT configuration requirements (see Requirements for Online Recalls / Bookings).

...

To set up Online Appointment recall parameters within EXACT


Set this up by means of the Recall Parameters Screen.

...

  1. Open the Recall Manager.
  2. Click the Configure Recalls button:

    ConfigureRecallManager-button

    The Recall Parameters Screen displays:

    ConfigureRecallManager-screen1

    NOTE: Each time that you upgrade the EXACT software, existing settings will propagate into the upgraded Recall Manager.

  3. Configure the different Recall Parameters as indicated below:


Recall Types

Dentist and Hygienist, with Providers listed for each.
This table is a summary. To configure Dentist and Hygienists, see:

Edit Recall Type for Dentist or Hygienist

TIP: You can manually override the default assignment of Providers to Dentist / Hygienist Recall Type. For example, you can re-assign Therapists to the Hygienist Recall Type for practical recall reasons, as they are not permitted to do diagnostics.

Merge Fields

Click to open a Merge Fields Window.

From here you can see how the merge fields will appear in patient communications. This includes:

  • Combinations of Dentist and Hygienist recalls.
  • Family recalls.
  • Combined dentist and Hygienist Service (co-ordinated duties) - this must be activated. Click in this field to see the selection controls.

IMPORTANT: This screen provides a means of specifying whether Dentist and Hygienist recall appointments should be booked separately or in combination, which affects how Receptionists book recalls in the Appointment Book.

Online Recalls

Click this button to open a screen for configuring the times during which patients can book recalls online.
See:

Using Recall Patient online booking

Configuring Recalls online appointment booking

Automation

Configure EXACT to automatically send recalls by available means such as SMS, Email and EasyPost.

See: Automating Recalls


...

  • Customise the website colour scheme and fonts.
  • Incorporate a practice logo.
  • Create a practice bio/overview, including opening hours.
  • The software automatically populates your web page with a Google map based on your physical address.
  • Cater to all forms of patient booking:
    • New Patients (Private/NHS/Payors)
    • Existing Patients (Private/NHS/Payors)
    • Recall Bookings
    • Planned Treatment Bookings
  • Create multiple Booking Reasons, with defined Price and Deposit (the Deposit field is only available if you have the Online Payments module)
    • Customise the Booking Reason display order.
  • Flexibly configure Providers who will be associated with Booking Reasons, and customise all appointment parameters per Reason/Provider.

    Note that Providers who are associated with a Booking Reason can be configured with different appointment durations, Service, Clinics, unbooked time, SMS template and Email template - a Booking Reason is not locked to one service, Provider or any particular appointment parameter.

  • Campaigns created in Marketing Manager can be associated with a particular Booking Reason. Users booking online as a result of a campaign can then be tracked for marketing metrics.
    • View all marketing-related Booking Reasons in the Web Setup screen.
  • Add a Google Analytics Tracking ID that enables Google analysis and reporting on the number of people clicking through to the online booking portal.
  • Opt to take payments from the website, for which receipts are generated from EXACT (requires the Online Payments module)
  • Customise the policies and procedures that patients view on the booking site.

...

  • All configuration tasks can be conducted within EXACT; there is no need to go to an external website for configuration.
  • Customise, add and remove Booking Reasons that patients will see as options. These Reasons are not constrained to limited preset options - create any reasons that suit your bookings.
  • Because the EXACT Online Booking Website Builder is built into EXACT,
    • Our software developers can build upon the tight integration between EXACT and online bookings (Existing Patient online booking is an example).
    • Going forward the website builder will evolve in step with EXACT to directly suit the needs of our EXACT users.
    • Practices secure committed bookings by taking online deposit payments.

...

Prerequisites for Location support in Online Booking:

  • EXACT v12.8 or later.
  • The practice is configured for Online Booking, with booking functionality.
  • Practice Locations are enabled:

    (Configure - > Practice Settings > checkboxblack-checked Enable Locations)

  • Once Practice Location is enabled (above), it becomes possible to enable online appointments Enable Locations as follows:

    Configure > Online Appointments > Web Setup window > checkboxblack-checked Enable Location

  • The practice must be configured for multiple Locations, where EXACT then treats each Location as a separate "practice" for patient booking purposes and for Provider free time available for bookings.
  • Online booking Free Time must be uploaded to activate each Location as a new practice.
    This is only possible if Providers are configured for a Preferred Location (in the Provider File), so that their free time is available in the new Location.
    If provider Preferred Location is not specified, EXACT assumes the practice Default Location as the Provider's preferred location, and the free time will only upload to the practice default location.
  • Recommended: Patents are configured for a Preferred Location (in the Patient File Details tab). If not specified, EXACT assumes the practice default Location as the patient's preferred location.


On upgrade to EXACT v12.8:

Practices with multiple existing Locations will have those locations listed in the Web Setup, but without being configured or enabled.

...

  1. If not already set up, configure multiple locations for your practice.

    NOTE: Once locations are enabled, until you define them, on logging into EXACT you will see this message:

    NoLocations

  2. When configuring Web Setup, tick to Enable Locations, then select a Location:

    WebSetup-EnableLocations


    Default Location for Providers and Patients who have none specified:

    The top Location in the dropdown menu is used by EXACT as the preferred Location for those Providers and Patients who have not specifically been configured with a Location:

    DefaultLocation for Provider

    So, unless you assign New patients a Location, EXACT will assume this as their Location.


  3. Click the Practice Info button to set up the online booking page for the selected location.

    (You can independently set up a booking website for each of your created Locations):

    ConfigurePracticeInfo



  4. Repeat the Practice Info setup for each Location in the dropdown list.

    Appearance options:

    • Maintain a common corporate appearance across Locations, or
    • Configure different looking Locations:

      ConfigurePracticeInfo-Locationspng


  5. In the Web Setup, customise the booking websites / locations to match the Practice Info.

    For example:

    WebsiteSetupExample

  6. Setup the address, phone number and description per location.
  7. Use the same practice Email address across all locations.


EXACT applies the following logic in using Preferred Locations versus other locations:

...

  1. If an online booking Provider has this preferred location field specified in Provider file > Pref Location, EXACT uploads their free time to their preferred location booking page.
  2. Otherwise the provider's free time is uploaded to the default online booking location.

...

The Patient Details tab has a Pref Location field.

  1. EXACT first uses a patient's Preferred Location, if specified in Patient file > Details tab > Pref Location.
  2. If a patient does nothave a specified preferred location, EXACT uses the patient Provider's location.
  3. If the patient Provider does nothave a specified preferred location, EXACT uses the default online booking location.

...

Combined Recalls:

For Combined Recalls, EXACT uses location options in this order:

...

Family Recalls:

For family recall, EXACT uses the main contact patient's location in this order:

...

Marketing Campaign:

For marketing campaigns EXACT uses locations in this order:

...

Appointment Workflow:

From EXACT v12.9 practitioners who log in to a Location and use the Appointment Workflow will see only that Location's patients on the Departure Task List (Exit Workflow). Patients who are booked for a different Location will not display.

...

Merge Fields for Preferred Location:

From EXACT v12.9 EXACT has merge fields specifically for using the Preferred Location in patient correspondence.

...

  1. Select File > Providers...
  2. Choose a Provider.
  3. At bottom left of the Provider Setup, use the selectors to specify a Pref. Location:

    PrefLocation-Provider.


    If you do not configure a Provider Preferred Location:

    The top Location in the dropdown menu will be used by EXACT as the preferred Location for those Providers who have not specifically been configured with a Location:

    DefaultLocation for Provider


    If the Preferred Location is deleted from Locations setup:

    In this situation EXACT will prompt you to update the Provider's Preferred Location.

...

  1. Select the Patients desktop > Details tab.
  2. Select a Patient.
  3. Use the selectors in the Pref. Location field to select the Preferred Location:

    DetailsTab-PreferredLocation


    If you do not configure a Patient Preferred Location:

    The top Location in the dropdown menu will be used by EXACT as the preferred Location for those Patients who have not specifically been configured with a Location:

    DefaultLocation for Provider



...

EXACT Online Booking Website Builder

Use the EXACT online booking website builder to configure your dental practice online booking website from within EXACT.


Overview of EXACT Online Booking Website Builder

EXACT's Online Booking Website Builder enables dental practices to configure their online booking websites from within EXACT, without leaving the EXACT software.

Features:

  • Customise the website colour scheme and fonts.
  • Incorporate a practice logo.
  • Create a practice bio/overview, including opening hours.
  • The software automatically populates your web page with a Google map based on your physical address.
  • Cater to all forms of patient booking:
    • New Patients (Private/NHS/Payors)
    • Existing Patients (Private/NHS/Payors)
    • Recall Bookings
    • Planned Treatment Bookings
  • Create multiple Booking Reasons, with defined Price and Deposit (the Deposit field is only available if you have the Online Payments module)
    • Customise the Booking Reason display order.
  • Flexibly configure Providers who will be associated with Booking Reasons, and customise all appointment parameters per Reason/Provider.

    Note that Providers who are associated with a Booking Reason can be configured with different appointment durations, Service, Clinics, unbooked time, SMS template and Email template - a Booking Reason is not locked to one service, Provider or any particular appointment parameter.

  • Campaigns created in Marketing Manager can be associated with a particular Booking Reason. Users booking online as a result of a campaign can then be tracked for marketing metrics.
    • View all marketing-related Booking Reasons in the Web Setup screen.
  • Add a Google Analytics Tracking ID that enables Google analysis and reporting on the number of people clicking through to the online booking portal.
  • Opt to take payments from the website, for which receipts are generated from EXACT (requires the Online Payments module)
  • Customise the policies and procedures that patients view on the booking site.

...

  • All configuration tasks can be conducted within EXACT; there is no need to go to an external website for configuration.
  • Customise, add and remove Booking Reasons that patients will see as options. These Reasons are not constrained to limited preset options - create any reasons that suit your bookings.
  • Because the EXACT Online Booking Website Builder is built into EXACT,
    • Our software developers can build upon the tight integration between EXACT and online bookings (Existing Patient online booking is an example).
    • Going forward the website builder will evolve in step with EXACT to directly suit the needs of our EXACT users.
    • Practices secure committed bookings by taking online deposit payments.

...


Provider Images button

Button-ProviderImages

Only Providers who are configured for Online Bookings will display in this window.

Configure identifying images for Providers, such as photos, cartoons or symbols:

ProviderImages

The image must be on a web server that the system can access continuously without a password or access restrictions.

Location examples: on your main practice website, on a freely accessible Flickr page, a shared Google Drive folder, or a shared Dropbox folder.

For each Provider, enter a web address to the image and then click the Connect to Picture button to display the image and check that the connection functions.

Practice Information

Button_PracticeInfo

Select the Practice Info button to configure Practice Logo, colour scheme, a textual summary of the practice (opening times, services, specials, location, etc.), and optionally, the Google Analytics code for the practice:

PracticeInformation_v12.1


Select a Practice Logo.

As the instructions state (see above image), the logo image must be on a web server that the system can access continuously without a password or access restrictions.

Examples of webserver locations: on your main practice website, on a freely accessible Flickr page, a shared Google Drive folder, or a shared Dropbox folder.

Paste or enter the web address of your logo to immediately display the image and check that the connection functions.

Mouseover the logo to see it at actual size:

Mouseover-Logo

Select a Colour Scheme to function as the dominant colour in the patient booking page.

Click-ColourScheme CustomColour-Site

Booking page example for Dolphin colour scheme (as about to be selected in the image above left):

ColourScheme-example


Add important practice information.|

AddImportantPracticeInfo


Practices can add a Google Analytics Tracking ID that enables Google analysis and reporting on the number of people clicking through to the online booking portal.

GoogleAnalyticsTrackingID

For practices with Locations, either

  • this code can be the same across Locations, or
  • each Location can have its own code for local tracking (in this case, add the ID to each Location from the Practice Info button for that Location).


The field has validation, so EXACT will warn you if your Google Analytics Tracking ID does not conform to the correct format.

Google Analytics is independent of EXACT and is not reported within EXACT - once set up you will need to log into a Google account to use the functionality.
GoogleAnalytics2_300px


Custom Text

CustomTextButton

Optionally add custom text:

Online Booking configuration includes a means of configuring two text areas for display on the booking website.

By default the intention is that when patients book online, at the end of the booking procedure they can view the practice policies/procedures for Complaints and Cancellations, however, these two text areas are completely customisable - give them ANY headers and ANY content.

Emergency contact email

EmergencyContactEmailButton

On the booking site patients will see this email address as the optional contact address.


...

At the end of the online booking procedure booking patients can view the practice complaints and cancellation procedures.

From EXACT v12.2 onwards you can customise these Configurable Policies.

...

By default the intention is that at the end of the booking procedure patients can view the practice policies/procedures for Complaints and Cancellations:

TextCustomisable CancellationsComplaints-Edit

However you don't have to call them Complaints and Cancellation - these two text areas are completely customisable - give them ANY headers and ANY content.


To customise these text areas

...

It also creates a payment method of .OLB (Online Booking), for use when EXACT receives a payment through online booking. The .OLB payment method is not available for use with standard (offline) payments.

...

Online payments configuration also creates a payment method of .OLB (Online Booking), for use when EXACT receives a payment through online booking.

...

Requirements for Online Payments

Requirements

  • EXACT version 12.1.
  • Online Booking (OLB) module has been configured for the practice.
  • The setup process includes practice registration with a third party online payments management company.

...

Stripe Online Payments Infrastructure

EXACT integrates with the Stripe online payment infrastructure.

...

IMPORTANT: The online booking financial figures reported in EXACT are before service charges by the third party Stripe banking, so the EXACT figures are not identical to the payments into your bank account.

...

When online booking becomes enabled EXACT creates an .OLB Patient Payment Method.

...

When a payment is received via the .OLB payment method, the following occurs in EXACT:

  • EXACT creates a new open patient transaction record:

    OLB-TransactionRecord

  • Within the transaction record detail the Comment field displays the third party Authorisation ID for that payment transaction and the Payment Method is set to .OLB:

    AuthID-AllocationsReceipt

  • EXACT sends a receipt of the received OLB transaction to the patient email address.

    This receipt template in EXACT is Online Payment Receipt.

    This template can be viewed and edited

  • The sent receipt is added to the patient’s Contacts with the description Online Payment Receipt.
  • Note that the system does not support electronic refunding - all refunds must be managed by means of the standard practice process.

...

Online Booking Receipt Template

EXACT has a default Email template for sending online booking receipts: .OLB_RECEIPT_EMAIL

...