com.atlassian.confluence.content.render.xhtml.migration.exceptions.UnknownMacroMigrationException: The macro 'html' is unknown.

EXAMINE PRO Requirements

Owned by Craig Obee
Mar 11, 2021
2 min read

Specific hardware requirements for EXAMINE Pro

  • Windows 2000 is not supported.

  • Server RAM Requirement is minimum of 4Gb.

  • Workstation RAM Requirement is minimum of 4Gb.

  • If you are purchasing the XIOS Sensor or any other Xray equipment that uses the Sirona database the server should be installed with a minimum of 4 Gb RAM.

  • If you are using Trophy or Kodak branded equipment, there are a number of versions of the Kodak Imaging software shipped with these products. We have tested a number of these with EXAMINE pro and we currently support the following versions:

V6.1.7.0, V6.0.5.5, V6.3.7, V6.4.4.0, V6.8.2.0A, V6.8.4.1A, V6.8.6.0, V6.10.7.3A, V6.11.6.2A, V6.12.5.2B, V6.12.11.0A, V6.12.15.0A.
If you are unsure about what version you have or require for your equipment please discuss with your Sales contact.

  • Ideally, all X-ray/Imaging equipment should be configured and working with the manufacturer's software before Examine Pro is installed.

  • Digital Images can take significant storage space; we recommend that you purchase the largest drive available from your supplier to ensure you have enough space.

  • The intensive graphic usage may cause performance issues, in which case it will help to install a video card that supports hardware acceleration.

  • EXAMINE Pro digital imaging software supports 64 bit operating systems, however you will need to check with your digital imaging hardware supplier whether your hardware has the necessary drivers for 64 bit operating systems.

  • EXAMINE Pro requires a minimum resolution of 1280 x 1024 to operate correctly. Anything below this and you may not be able to see all of the programme.

 

Digital imaging storage requirements:

  • EXAMINE Pro does not support the use of Network Storage Devices (NAS Drive); the data therefore will need to be stored on a local Hard Drive or Solid State Drive on the Dental Server. This can however be a separate drive from the EXACT Data. This is necessary to reduce the likelihood of poor software performance relating to compromised network speed.

  • Hard drive space for imaging should be 160GB or more. This will depend on the quantity of Images the practice will be taking.

Example of incompatible devices:
Some older technology ISA capture cards such as the older Trophy\Kodak capture cards are incompatible with Windows XP.

©2023 Henry Schein One International. All rights reserved.