/
Setting up a Scanner in EXACT
com.atlassian.confluence.content.render.xhtml.migration.exceptions.UnknownMacroMigrationException: The macro 'html' is unknown.

Setting up a Scanner in EXACT

Your IT company will probably have done this. You should only change the scanner setup if new hardware is installed or scanning is not working.

  1. From the ‘Contacts’ tab (You can choose any patient), click on the button to open the ‘Select Source’ window:

    This will show all scanner and camera drivers that have been installed on your PC.
    From the ‘Contacts’ tab, click on the “source” button and a window similar to the following will appear:

  2. Click on the required Source.

  3. Click on the Select button.

  4. You have now selected the scanner driver. Unless you change scanners, you will not have to do it again.


Note that you also need to specify the Scanning Format.

To configure the scanning format (This example is for PDF format. recommended)

  1. Select Configure > Practice Settings.

  2. Under the Format for Scanned Documents header, select the PDF (multipage support) option:

    Note that the indication of which scanned documents file types support single / multi-page scanning.

  3. Select OK.

Related content

Changing the Scanned Documents Format
Changing the Scanned Documents Format
More like this
Presentation Manager opens separately to Microsoft Word displaying no documents
Presentation Manager opens separately to Microsoft Word displaying no documents
Read with this
Scanning Documents
Scanning Documents
More like this
Set up a Printer
Set up a Printer
Read with this
EXACT RECEPTION GUIDE - Republic of Ireland
EXACT RECEPTION GUIDE - Republic of Ireland
More like this
Setting up an Email account in EXACT
Setting up an Email account in EXACT
Read with this

©2023 Henry Schein One International. All rights reserved.